Customer Service:

**Please note: Decals are designed to be applied on the exterior.

 

Step 1
Clean the area thoroughly. Measure and place the decal in the desired location. Put a piece of masking tape on the sticker to hold it in place and mark the place.

Hint: For best results do not install the decal in extreme heat or cold.

Step 2
Lift masking tape edges off of white paper backing.  Lift the decal up and peel the white paper backing off the decal.  Be careful not to pull the masking tape off.  (Decal will be attached to masking tape.)

Step 3
Slowly lower the decal and rub it in place with a credit card or similar item.

Step 4
Wait a few minutes then slowly peel the masking tape off at an angle. Be very careful not to pull the decal off the surface. If the decal pulls away from the surface repeat step 3.

 

Thank you again for your purchase.  We hope you enjoy your decal!